Daily AutoCAD - Latest Comments in http://www.dailyautocad.com/2008/05/introduction-to-autocad-3d_19.html

Re: http://www.dailyautocad.com/2008/05/introduction-to-autocad-3d_19.html

Noor — Wed, 05 Jan 2011 04:54:34 -0000

thanks it's very useful

Re: http://www.dailyautocad.com/2008/05/introduction-to-autocad-3d_19.html

Ben — Thu, 24 Jun 2010 05:07:46 -0000

Hi Orhan
A discussion about 3d point filters would also be useful.
---------------------------------------
3D AutoCAD Pipework - http://www.HerculeDesign.com/

Re: http://www.dailyautocad.com/2008/05/introduction-to-autocad-3d_19.html

duns — Wed, 23 Dec 2009 01:18:00 -0000

how to make 3d animation in autocad

Re: http://www.dailyautocad.com/2008/05/introduction-to-autocad-3d_19.html

Orhan Toker — Sat, 17 Oct 2009 05:15:51 -0000

Hello taicanada,

I'm very happy to hear the words like that from our readers. You're wellcome.

Regards

Re: http://www.dailyautocad.com/2008/05/introduction-to-autocad-3d_19.html

taicanada — Sat, 17 Oct 2009 04:23:48 -0000

Thanks a lot for these tutorials; I couldn't believe something like this is out there. I have been trying to learn autocad 2007, having started on R14 and 2000, and then left it for some time. Again, thank you.

Re: http://www.dailyautocad.com/2008/05/introduction-to-autocad-3d_19.html

lulu — Sun, 21 Jun 2009 06:24:04 -0000

hi ,,,

I really enjoyed most if your lessons , one problem that I am always facing is how to draw on the 3d modeling, wht i mean is when i draw a line on the prespective view or extended it it it always be extended on a different direction or hieght , I drew a line and i try to move it to mach acertan hieght but it is lways extended on the wrong direction...

how can I draw presizely while building a 3d modle

thaaanks

Re: http://www.dailyautocad.com/2008/05/introduction-to-autocad-3d_19.html

RANA AHSAN — Fri, 29 May 2009 12:44:11 -0000

hi,
i am ahsan, and want study about auto cad plz anny one would help me ,i want to se your 3dmodeling ..,,
thanks

Re: http://www.dailyautocad.com/2008/05/introduction-to-autocad-3d_19.html

arfeen — Thu, 28 May 2009 20:46:51 -0000

hi, i ve seen your 3d modeling articles , some of them are very easy, some of them difficult to understand, such as; loft, sweep revolve command. since , i m using acad 2004 version, please help me in this regard.
thanks

Re: http://www.dailyautocad.com/2008/05/introduction-to-autocad-3d_19.html

Rachel — Thu, 19 Mar 2009 12:14:35 -0000

Hello sir, I would like to know if there is any way I could find the information you have about Acad 3D Modeling in Dutch, I can't translate this page. I do know my way around the 2D Modeling, and I would like to learn to draw in 3D, but I'm not that skilled in Englisch. Is there a way you could help me? Thank you.... Rachel

Re: http://www.dailyautocad.com/2008/05/introduction-to-autocad-3d_19.html

Orhan Toker — Wed, 18 Mar 2009 06:29:27 -0000

@Tal,

You can save views by using "New..." option in VIEW command.

Re: http://www.dailyautocad.com/2008/05/introduction-to-autocad-3d_19.html

tal — Wed, 18 Mar 2009 02:32:58 -0000

hi,

can i ask how can i save a camera preview? or if not how to make an interior 3d model?...
thanks so much

Re: http://www.dailyautocad.com/2008/05/introduction-to-autocad-3d_19.html

shashank — Tue, 10 Feb 2009 02:13:38 -0000

Hi...
I am new student of 3d cad. I have a problem in subtraction and union means cutting and join two 3d or 2d objects.
my proctdure is
1. camand of subtraction
2. select first object
3. select second object
4. then press enter
after this also I can't cut one objet from another.
Is there any mistake in my procedure.
please help me...!

Re: http://www.dailyautocad.com/2008/05/introduction-to-autocad-3d_19.html

Orhan Toker — Mon, 12 Jan 2009 06:03:43 -0000

Peter,

You're welcome. Thanks,

Regards

Re: http://www.dailyautocad.com/2008/05/introduction-to-autocad-3d_19.html

Peter — Sat, 10 Jan 2009 16:31:12 -0000

Orhan

ive been searching the net looking for some 3D teaching advice - yours is the best ive seen yet.

Thanks
Peter

Re: http://www.dailyautocad.com/2008/05/introduction-to-autocad-3d_19.html

Orhan Toker — Sat, 22 Nov 2008 03:43:25 -0000

Hello Millenyum,

Thank you very much for your kind words. If you register Daily AutoCAD you can find all the stuff you want in our download pages.

Regards

Re: http://www.dailyautocad.com/2008/05/introduction-to-autocad-3d_19.html

Milenyum — Sat, 22 Nov 2008 00:32:18 -0000

Sir orhan,
You're such a great prof in AutoCAD. Your techniques are simple yet great. Im glad i've found this site cuz like others, am newbie in CAD especially 3d - but feels more confident now because of your teachings. and if it is possible, could you send some simple materials in my mail if it is just ok for you that i may use it for more practice. More power and thank you very much.

Re: http://www.dailyautocad.com/2008/05/introduction-to-autocad-3d_19.html

Orhan Toker — Sat, 15 Nov 2008 04:08:34 -0000

Your'e wellcome Dana,

I'm glad to see your kind words.

Regards

Re: http://www.dailyautocad.com/2008/05/introduction-to-autocad-3d_19.html

Dana — Sat, 15 Nov 2008 01:10:58 -0000

hi sir
i read all ur 3D tutorials.they ar soo easy to understanding.When the basic things get correctly others aare easy to do.thank you very much Mr.Toker.

Re: http://www.dailyautocad.com/2008/05/introduction-to-autocad-3d_19.html

dhiraj bajpai — Fri, 14 Nov 2008 15:41:03 -0000

thank you

Re: http://www.dailyautocad.com/2008/05/introduction-to-autocad-3d_19.html

irene — Thu, 06 Nov 2008 11:49:26 -0000

hi Orhan,
thank you so much, it worked. does this mean i have to do this each time? why does this happen? my colleagues are able to use the move function on their computers.

Re: http://www.dailyautocad.com/2008/05/introduction-to-autocad-3d_19.html

Orhan Toker — Thu, 06 Nov 2008 05:28:23 -0000

Hello Irene,

Use UCS [ENTER] X [ENTER] 90 [ENTER] command. And try to move it again :)

Re: http://www.dailyautocad.com/2008/05/introduction-to-autocad-3d_19.html

irene — Wed, 05 Nov 2008 12:42:17 -0000

hi,
i am using autoCAD 2009 and i am trying to use the move function in elevation mode but it only moves horizontally. i want to move up and down. i used to be able to do this with 2005 but now it doesnt seem to work. can anyone help?

thank you,
Irene

Re: http://www.dailyautocad.com/2008/05/introduction-to-autocad-3d_19.html

Gins — Thu, 23 Oct 2008 11:18:14 -0000

Hi....

I am using autoCAD 2008. I have a confusion about trim command when work with 3D. Many times i tried to trim a 3D object which intersecting other one in some angle. I could not do that and i am getting a a message that the particular object cant be trimmed. I used project command and tried all the options i knew. Could any one please help me to resolve my problem?

Gins

Re: http://www.dailyautocad.com/2008/05/introduction-to-autocad-3d_19.html

imrana kazmi — Thu, 21 Aug 2008 03:18:43 -0000

Slm sir
i am imrana from Pakistan. i feel i am lucky that i have this website to learn more abt CAD actually i miss my some class of CAD and it was a big lose of my study i am using AutoCad 2006 can u help me how to take print or plot of our drawing pages.

waiting with hope
God bless you bye

Re: http://www.dailyautocad.com/2008/05/introduction-to-autocad-3d_19.html

Orhan Toker — Fri, 08 Aug 2008 04:18:15 -0000

You're welcom Edin,

We're glad to like our site.

Regards