Daily AutoCAD - Latest Comments in http://www.dailyautocad.com/2009/01/understanding-coordinate-input-in.html

Re: http://www.dailyautocad.com/2009/01/understanding-coordinate-input-in.html

Orhan Toker — Mon, 04 Apr 2011 04:02:57 -0000

Hello,

You have to change Dynamic Input format from "relative" to "absolute" from drafting settings dialog.

Re: http://www.dailyautocad.com/2009/01/understanding-coordinate-input-in.html

Stickswood — Sun, 03 Apr 2011 14:34:25 -0000

Dont know if this will get through but I have downloaded a trial version and when I try to enter a line in absolute it seems to always default to relative after I put in the next point values. In other words I enter say 2,2 and when I push enter it shows up as @2,2. Any ideas.

Re: http://www.dailyautocad.com/2009/01/understanding-coordinate-input-in.html

Darren — Sun, 12 Sep 2010 03:42:22 -0000

Hello Orhan,

As part of mechatronics advanced diploma I need to learn autocad, and found your page, I just want to thankyou for making it clear on polar coordinates

Kind regards

Darren
Melbourne

Australia

Re: http://www.dailyautocad.com/2009/01/understanding-coordinate-input-in.html

Parag_agrawal1539 — Thu, 08 Jul 2010 14:28:51 -0000

really nice yaar

Re: http://www.dailyautocad.com/2009/01/understanding-coordinate-input-in.html

Hunapu — Tue, 11 May 2010 14:45:50 -0000

well thanks a lot for the information , finally I understand this part of the dinamic inputs i couldn 't find any information on the help menu.. this seems simple but sometimes can make you waste a lot of time trying to figure out how it works

Re: http://www.dailyautocad.com/2009/01/understanding-coordinate-input-in.html

Reason824 — Thu, 14 Jan 2010 01:34:21 -0000

Is one of these methods better used in certain situations?

Re: http://www.dailyautocad.com/2009/01/understanding-coordinate-input-in.html

MDMUZAMMIL MOHAMMED — Fri, 08 Jan 2010 09:52:24 -0000

EXLLENT.....................BOSS

Re: http://www.dailyautocad.com/2009/01/understanding-coordinate-input-in.html

mortada — Fri, 19 Jun 2009 01:32:30 -0000

hi
i am asking for method to draw multi point from garmine gps (as example) in one go way
thanks

Re: http://www.dailyautocad.com/2009/01/understanding-coordinate-input-in.html

Suhail — Tue, 16 Jun 2009 00:35:39 -0000

gr8 work ..

Re: http://www.dailyautocad.com/2009/01/understanding-coordinate-input-in.html

ignitor — Wed, 29 Apr 2009 08:58:23 -0000

Hallo, very nice explanations. Do anyone knows what are the maximum phyisical coordinate values in acad units that can be applyed and that autocad can handle, i understand that there is no border in the model space but there must be some limitations due to system number-handling capabilities. Then regarding the precission, on 32 bit and 64 bit systems respectively. Any answer would be appreciated.

Re: http://www.dailyautocad.com/2009/01/understanding-coordinate-input-in.html

Durgesh — Sat, 11 Apr 2009 06:11:04 -0000

How can I change excel xyz coordinate data to insert in autocad

Re: http://www.dailyautocad.com/2009/01/understanding-coordinate-input-in.html

arrey — Wed, 08 Apr 2009 18:31:36 -0000

i thank all of u for this

Re: http://www.dailyautocad.com/2009/01/understanding-coordinate-input-in.html

doaa — Wed, 18 Mar 2009 17:35:04 -0000

yes i want the same thing plz as shivan said

Re: http://www.dailyautocad.com/2009/01/understanding-coordinate-input-in.html

shivan — Sat, 24 Jan 2009 10:20:56 -0000

Hi ,

I am shivan working in water feature project in UAE .. please guide me how to show co-ordination point in darwing ... currently iam using from dimesnion tool Ordinate command... but this is not suffciient to use this becaz i need both suh as North and east point ..

please mail me

by
shivan

Re: http://www.dailyautocad.com/2009/01/understanding-coordinate-input-in.html

Orhan Toker — Sat, 10 Jan 2009 09:33:43 -0000

Hello Kamal,

Probably you are moving your model in modelview window. Please use only zoom and pan commands in modelview windows.

Regards

Re: http://www.dailyautocad.com/2009/01/understanding-coordinate-input-in.html

Kamal — Fri, 09 Jan 2009 10:42:41 -0000

Dear Sir
I am a Civil Engineer working in UK.I have a problem with auto cad. I prepared the drawing in model space in coordinate system. then I opened a layout and set up the drawing for print when I come back model space again my drawing is out of my coordinate system which is in different coordinate system.Could you explain the reson.
Thanks
Kamal

Re: http://www.dailyautocad.com/2009/01/understanding-coordinate-input-in.html

Orhan Toker — Mon, 03 Nov 2008 06:17:22 -0000

If you have node points already, you can use line command with NODE osnap.

Re: http://www.dailyautocad.com/2009/01/understanding-coordinate-input-in.html

MedB — Sat, 01 Nov 2008 12:39:27 -0000

how can i use node points for creating lines

Re: http://www.dailyautocad.com/2009/01/understanding-coordinate-input-in.html

MEGHA — Thu, 04 Sep 2008 10:20:10 -0000

hello!sir.
i have problem to draw a cordinate drawing in auto cad.i m working in international company in U.A.E.i m auto cad draftsman.but i don't know how to draw cordinates drawing.i already read your 1st lecture.but what about next lession???please give me an information about your 2nd lession.
sir, also i would like to know about autocad drawing.and put cordinates in ready autocad drawing.please give me some suggetion.

Re: http://www.dailyautocad.com/2009/01/understanding-coordinate-input-in.html

Orhan Toker — Wed, 23 Jul 2008 05:01:27 -0000

Merhaba Utku,

Elbette iki açı ve bir uzunluk verebilirsiniz. Buna küresel koordinat girişi deniyor. Verdiğiniz 1. açı XY düzleminde 2. açı XZ düzlemindedir. Kullanılışı;

@30<45<100 dür.

Sevgiler,

Re: http://www.dailyautocad.com/2009/01/understanding-coordinate-input-in.html

utku — Tue, 22 Jul 2008 10:21:08 -0000

Orhan bey iyi gunler 3 boyutlu çizimde komut satırına 2 açı ve uzunluk vererek çizgi çizdirebiliyor muyuz? 2 boyuttaki @200<30 gibi mesela. 2 gundur arıyorum ancak hala bulamadım yardım edebilirseniz sevinirim.

(Belki özlem giderirsiniz diye Türkçe yazdım:))

Re: http://www.dailyautocad.com/2009/01/understanding-coordinate-input-in.html

mitra — Sat, 07 Jun 2008 12:51:42 -0000

I am having 650 points in 3D. i need to display the x,y,z of all the points. using "FIELD" option i have to select every point individually to display their x,y,z.is there any other option to select them all at a time and display their x,y,z?
again, if i am having a large nos of digits arranged in column or row form in the Autocad drawing, is there any option so that i can directly copy them and paste them in the excel so that every digit is placed in individula cell in the excel?

Re: http://www.dailyautocad.com/2009/01/understanding-coordinate-input-in.html

Prashant — Mon, 28 Apr 2008 03:34:00 -0000

I have one excel file of 13,000 xy coordinate.. I want to draw 25dia circle at each poit. can you suggest me how??

Re: http://www.dailyautocad.com/2009/01/understanding-coordinate-input-in.html

Randy — Wed, 05 Dec 2007 15:34:39 -0000

I've done lots of manual drafting. But converting from boardwork to the computer has been very challenging. I understand the coordinates I think, but my lines don't seem to end up where I would like them to.

Re: http://www.dailyautocad.com/2009/01/understanding-coordinate-input-in.html

Mandeo Yadav — Sun, 02 Dec 2007 06:16:02 -0000

Dear sir,
Presently I'm working with Lafarge South Africa Cement Plant, Lichtenburg. Basically I’m a mechanical engineer. I'm very much interested to learn Auto CAD drawing. Latter on I'm planning to set up my own business in the area of auto cad drawing and design.
I read your articles on auto cad. These are very much interesting. I'm very much impressed. I'll continue reading and learning through your articles. Since I'm a beginner, I don't have any comments to mention.
Please advise me the way to move ahead for setting up my own business.
Rest in the next mail.
With kind regards,
Yadav Mandeo